Blue Screen Fix

1. IRQL_NOT_LESS_OR_EQUAL
(The blue screen is most often famous because it most often appears.
Because the cause DRIVER PROBLEM THAT IS NOT SUITABLE or clashing.
But this blue screen can also be caused by THAT EXCESSIVE overclock graphics card.

"The solution"
Try to analyze whether you should replace your graphics card with a new-?
If so, make sure the VGA drivers long-deleted before installing new graphics card drivers who
DRIVER MAKE SURE it fits with your own graphics card. If the blue screen is still happening
as you raise your VGA CLOCK, then TRY LOWER CLOCK VGA)

2. INACCESSIBLE_BOOT_DEVICE
(The blue screen appears because of the ERROR IN CONFIGURATION JUMPER HARDDISK.
In addition, the BOOT SECTOR VIRUSES, IDE Controller Driver WRONG,
CHIPSET DRIVER ERROR Or it could be a culprit as well.

The solution
Check the Hard Disk JUMPER pd. Make sure the configuration MASTER or SLAVE.
Usually for SLAVE configuration, you can simply remove any jumper. )

3. NTFS_FILE_SYSTEM or FAT_FILE_SYSTEM
(Of course the error message is looming cause this blue screen.
The blue screen appears because the FILE SYSTEM IS BROKEN IN HARD DISK.

The solution
Try checking HARD DISK by going to Windows Explorer.
Right click on HARD DISK DRIVE, then click "PROPERTIES", click "TOOLS", then click the "CHECK NOW"
On the tab "Error Checking", tick the second option, and click "OK"
Resrtart PC.
Try Check the "CABLE HARD DISK". Whether it is installed correctly.
if the blue screen is still too ARISE trial software is useful for improving
As the damaged File System Partition Table Doctor.)

4. UNEXPECTED_KERNEL_MODE_TRAP
(The blue screen is caused by overclocking D IS EXCESSIVE, MEMORY OF TROUBLED,
or WRONG BIOS. This can be caused by COMPUTER COMPONENTS THAT TOO HOT.

The solution
Lower PROCESSOR CLOCK and VGA. Also check the Fan SPEED PROCESSOR and VGA.
If the fan is WEAK round then you must replace these fans.
If the blue screen is caused by the BIOS YG FALSE, then UPDATE your BIOS.
DO NOT FORGET TO MAKE SURE THAT THE NEW BIOS COMPATIBLE WITH YOUR MOTHERBOARD.
Also check the RAM. You can also use software like Memtest86 Memory Testing.
If the detected RAM Testing Problematic of it, then CHANGE THE RAM.
Before replacing the RAM do not forget to note the type of socket AND VELOCITY clocknya.)

5. UNABLE_TO_LOCATE_DLL
(The reason is the execute file FAILURE WINDOWS DDL.
It could also be because the D DLL FILE MISSING or BROKEN. Other causes are the presence of
Uninterrupted registry file.

The solution
You need to prepare intalasi Windows CD to fix this blue screen.
BOOT to CD, then SELECT "REPAIR".)

6. UNKNOWN_HARD_ERROR
(It is important registry files can not be executed because the file is corrupted or missing.
Damaged and Missing files can be due to HARD DISK DAMAGED.
It could also be a blue screen appears because the registry is executed MEMORY PLACE
Having Parity ERROR.

The solution
Perikasa RAM with software testers on a ram error. Then dislodged the RAM is problematic.
DO NOT FORGET TO CLEAN THE PIN-PIN socket and RAM. If the blue screen is still the case
Fix Windows with a CD try intalasinya. If the blue screen is still too THEN Happen
RAM REPLACE WITH NEW D.)

7. STATUS_IMAGE_CHECKSUM__MISMATCH
(Messages like this indicate a problem with DRIVER. In addition to problems with drivers,
these errors can also be caused by the File System The Troubled, Page File a corrupt, or
Hardware damage.
Hardware is usually Memory or HDD. )

8. BAD_SYSTEM_CONFIG_INFO
(The blue screen is caused File corrupted Registry reply. RAM can also cause problems
this blue screen.

The solution
Try checking a PIN SOCKET and RAM. All CLEAN ONLY. If you already Replace,
If the blue screen is still happening again TRIAL OFF ONE OF RAM.
If the error stops, MEMORY THAT YOU OFF IS TROUBLED. If the error is still too
try to plug a removable memory last longer and out of memory again to check which one
memory error. ALSO IF STILL ERROR MEMORY SLOT MEMORY or BOTH ARE TROUBLED. )

9. PAGE_FAULT_INONPAGED_AREA
(Blue Screen is out because of a HARDWARE DAMAGE. As HARD DISK, MEMORY,
or VGA. Oh yes, the destruction of L2 cache on the PROCESSOR also cause this blue screen.

If it was not the solution = REPLACE SERVICE COMPONENT Damaged or earlier. )

10. DATA_BUS_ERROR
(Data Bus errors can be caused by some factor.
Among them is defective RAM, L2 CACHE RAM, VGA. Jg can be caused by RAM CLOCK
NOT THE SAME. MBR (Master Boot Record), which was attacked by the virus could also be one
one cause of this blue screen.

the solution
Using RAM with CLOCK THE SAME, SCAN DISK with AntiVirus,
Fix MBR with the Windows Installer CD.)

11. STATUS_SYSTEM_PROCESS_TERMINATED
The cause of this message is disruption of vital processes such as Winlogon
or CSRRS. Windows is not able to operate because the process was interrupted.
Malware can also be the cause of this blue screen appears.

The solution
You can do SYSTEM RESTORE pd SAFE MODE. Another option you can fix
Windows with a CD Installernya.Tentunya if any Malware, Malware clean too.

12. UNMOUNTABLE_BOOT_VOLUME
(Reason: hard disk error

completion: pake bootable windows, go into recovery console,
after that use the command chkdsk fixboot)

source: self experience