speedy troubleshould

TROUBLESHOOTING TIPS WITH SPEEDY INTERNET NETWORK

Are you speedy Internet subscription at home or office? if so you may have experienced as I have that sometimes we can not connect, which may be because we do not know why suddenly the internet dead. There are a few tips that can be done to improve our internet connection before we despair or give up and call a network technician or call a technician who might direct speedy arrival not as fast as we expected.

In the first case. Speedy you will not be sharing, you just do a direct Internet connection from the modem + router's speedy, without going through a hub / switch, or server. If your Internet connection suddenly died (in this speedy) do the following steps:
Speedy restart your modem, then try to connect again. If you can not,
Check the physical network such as cable Lan and his Ph. Line, Is LAN loose / loose and the phone line can be used for NELP out ... If it is confirmed ok, try again ... If you have not been able to connect,
Try to go into the settings of your modem and see the WAN section, look in there about what causes it. Do I type the address of your speedy router (default: http://192.168.0.1). If this step you can not immediately wrote to step 3. Repeat the WAN settings by entering your username and password speedy, and little-settingannya setting.
Call the technician network / computer or your friend who understands or just complain to the speedy telecoms (tel: 147) request that his technicians came.
In the second case. Speedy-sharing your using a hub / switch, a web-proxy (eg Mikrotik, Squid), even using the hotspot / wifi. before it gets to your home. So in this case I'll assume you are at the last position. The Internet is through a modem + router-> webproxy-> Switch1-> access point1-> client access point-> swith2-> access point2-> you. wakakakka ..
The steps you should do if the Internet die, why not connect ya are:
Immediately call / sms your network admin to check your internet connection. Hahahha you just prepare just snack food + drinks + + +, if do not want to be like that try ...
Analysis of its own demise where, check from the back (from your computer),
Check your computer whether wifi or lan card you are using is on, if ok ...
The next line checks, check your access point ... maybe the problem is there. Check the physical and application. Physically look at the connections and power on, the application's settinga see in it by accessing it, from setting in is also already know what access point you connect to a switch or not, if it is ok ...
Switch1 check whether the physical connection is alive and ok ... who knows the cable broke bitten mice eat it, because this event at my place ... because of lan cable in place on top ... eaten by rats! if it is ok ...
Check the Client Access Point, is life?, Whether it can signal from Access point1, whether its setting is correct and has been connected ... if it is ok ... more ...
Check ... Check Webproxy Switch1, Cheque Modem ... if belom speedy technicians can tel ... maybe longer ... disruption.
If you want fast, does not necessarily follow the steps above, usually once a check is one such tool can infer where the break was used to break up ... if khan ... Just wrote a check directly from webproxy .... Would have found out where the breakup ... but who have khan access limited only certain people (aka admin.) ....
Fine wrote that much ... anyone want to add please ... learn also nich ...